Jaws

US Shop Tools





Category Index
CHUCK NUMBERS
Form B3


PRIVACY POLICY
TAPS
TERMS AND CONDITIONS
VDI STATIC HOLDERS
AXIAL FORM TURNING TOOL HOLDERS
About Us
CHUCK JAWS
QUICK CHANGE SHF HARD JAW OVERSTOCK (LIMITED TIME) SALE - FREE GROUND SHIPPING !
1.5MM X 60 DEG METRIC FINE SERRATED - MOST ASIAN CNC CHUCKS UPTO 15" DIA
  > 4-5in. Kitagawa, Samchully, Strong
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Jaw Nuts
  > 6in. Kitagawa, Samchully, Strong, MMK, SMW, Howa, Hitachi
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 8in. Howa, SMW only
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
  > 8in. Kitagawa, Samchully, Strong, MMK, SMW, Suga, Hitachi
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 10in. Howa only
    • Jaw nuts
  > 10in. Kitagawa, Samchully, Strong, MMK, SMW, Howa, Hitachi
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 12in. Howa Only
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
  > 12in. Kitagawa(B-12), Samchully, Strong
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 12in. Kitagawa(B-212), Samchully, Strong, MMK, SMW, Hitachi
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 15in. Kitagawa(B-15), Samchully, Strong
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 15in. Kitagawa(B-215), Samchully, Strong
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jawnuts
  > 16in.+ Kitagawa, Samchully, Strong, MMK, SMW, Howa, Hitachi
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Jaw Nuts
  > Others
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jaw Nuts
AMERICAN STANDARD TONGUE & GROOVE - MANUAL CHUCKS
  > 4in. American Standard Tongue and Groove Manual Chucks (using 1/4in. cap screws)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
  > 5in. American Standard Tongue and Groove Manual Chucks (using 5/16in. cap screws)
    • Aluminum Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
  > 6in. American Standard Tongue and Groove Manual Chucks (using 3/8in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 6in. American Standard Tongue and Groove Manual Chucks (using 7/16in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 8in. American Standard Tongue and Groove Manual Chucks (using 3/8in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 8in. American Standard Tongue and Groove Manual Chucks (using 1/2in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 10in. American Standard Tongue and Groove Manual Chucks (using 1/2in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 10in. American Standard Tongue and Groove Manual Chucks (using 5/8in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 12in. American Standard Tongue and Groove Manual Chucks (using 1/2in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 12in. American Standard Tongue and Groove Manual Chucks (using 5/8in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 15in. American Standard Tongue and Groove Manual Chucks (using 5/8in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 15in. American Standard Tongue and Groove Manual Chucks (using 3/4in. cap screws)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 18in. American Standard Tongue and Groove Manual Chucks (using 3/4in. cap screws)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
  > 24in. American Standard Tongue and Groove Manual Chucks (using 3/4in. cap screws)
    • Aluminum Round Jaws
  > 24in. American Standard Tongue and Groove Manual Chucks (using 7/8in. cap screws)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
3.0MM X 60 DEG METRIC COARSE SERRATED - MANY ASIAN CNC CHUCKS 15" AND LARGER
  > 6in. Chucks with 3.0mm x 60deg Serrations (Groove width =0.472, Screw =M10, Hole Space =0.787)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
  > 8in. Chucks with 3.0mm x 60deg Serrations (Groove width=0.551, Screw=M12, Hole Space=0.985)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Cast Iron Round Jaws
  > 10-12in. Chucks with 3.0mm x 60deg Serrations (Groove width=0.591, Screw=M12, Hole Space=1.181)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
  > 10-12in. Chuck with 3.0mm x 60deg Serrations (Groove width=0.630, Screw=M12, Hole Space=1.181)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
  > 10-14in. Chucks with 3.0mm x 60deg Serrations (Groove width=0.709, Screw=M14, Hole Space=1.181)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
  > 15in. Chucks with 3.0mm x 60deg Serrations (Groove width G=0.827, Screw=16mm, Hole Space D=1.575)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
  > 15in. Chucks with 3.0mmX 60deg Serrations (Groove width G=1.022-1.025, Screw=M20, Hole Space D=1.653-1.656)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
  > 15-18in. Chucks with 3.0mm x 60deg Serrations (Groove width G=0.866, Screw=20mm, Hole Space D=1.969)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
  > 18-21in. Chucks with 3.0mmX 60deg Serrations (Groove width G=0.984, Screw=M20, Hole Space D=1.969/50mm-2.000)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Hard Jaws
  > 18-20in. Chucks with 3.0mm x 60deg Serrations (Groove width G=1.023, Screw=20mm, Hole Space D=1.969)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Round Cast Iron Jaws
    • Hard Jaws
    • Jaw Nuts
  > 18-24in. Chuck with 3.0mm x 60deg Serrations (Groove width=0.984, Screw=M20, Hole Space=1.907
    • Hard Jaws
  > 18-24in. Chucks with 3.0mm x 60deg Serrations (Groove width=0.984, Screw=M20, Hole Space=2.362
    • Aluminum Round Jaws
  > Kitagawa B-21, B-24 and other chucks with 3.0mm x 60deg Serrations (Groove width G=0.984, Screw=20mm, Hole Space D=2.360)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
  > 24in. Chucks with 3.0mm x 60deg Serrations (Groove width G=0.984, Screw=20mm, Hole Space D=3.150)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
METRIC TONGUE & GROOVE - EUROPEAN QUICK CHANGE CHUCKS
  > 5-7in. Chucks with Metric Tongue & Groove (Groove width G=0.315, Screw=8mm, Hole Space D=1.260)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 6in. Chucks with Metric off centered Tongue & Groove (Groove width G=0.315, Screw=5/16, Hole Space D=1.260)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 8in. Chucks with Metric Tongue & Groove (Groove width G=0.393, Screw=8mm, Hole Space D=1.575)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 8in. Chucks with Metric off centered Tongue & Groove (Groove width G=0.393, Screw=5/16, Hole Space D=1.575)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 10in. Chucks with Metric off centered Tongue & Groove (Groove width G=0.472, Screw=1/2, Hole Space D=1.575)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 10in. Chucks with Metric Tongue & Groove (Groove width G=0.472, Screw=12mm, Hole Space D=1.575)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 12in. Chucks with Metric off centered Tongue & Groove (Groove width G=0.472, Screw=1/2, Hole Space D=2.126)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
  > 12in. Chucks with Metric Tongue & Groove (Groove width=0.500, Screw=1/2, Hole Space=2.500)
    • Aluminum Soft Jaws - Flat and Pointed
    • Hard Jaws
    • Steel Soft Jaws - Flat and Pointed
  > 12-16in. Chucks with Metric Tongue & Groove (Groove width G=0.472, Screw=12mm, Hole Space D=2.126)
    • Cast Iron Round Jaws
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 16in. Chucks with Metric off centered Tongue & Groove (Groove width G=0.708, Screw=5/8, Hole Space D=2.362)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
  > 18-24in. Chucks with Metric Tongue & Groove (Groove width G=0.708, Screw=16mm, Hole Space D=2.362)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
1/16 X 90 DEG INCH FINE SERRATED - SOME SMW, SCHUNK CHUCKS
  > 5in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.433, Screw=5/16, Hole Space D=0.625)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.433, Screw=5/16, Hole Space D=0.718)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.472, Screw=8mm, Hole Space D=0.630)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.473, Screw=5/16, Hole Space D=0.591)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.551, Screw=3/8, Hole Space D=0.710)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.551, Screw=3/8, Hole Space D=0.787)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 5-10in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.551, Screw=3/8, Hole Space D=0.875)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.590, Screw=10mm, Hole Space D=0.810)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 5-6in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.551, Screw=3/8, Hole Space D=0.984)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 5-10in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.669, Screw=3/8, Hole Space D=0.875)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 8in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.669, Screw=1/2, Hole Space D=0.875)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 8in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.669, Screw=1/2, Hole Space D=0.945-1.000)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 8in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.669, Screw=1/2, Hole Space D=1.125)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 8in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.710, Screw=12mm, Hole Space D=0.830)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 8-12in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.827, Screw=5/8, Hole Space D=1.187)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 10-12in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.787, Screw=1/2, Hole Space D=1.181-1.187)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 10-12in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.826-827, Screw=16mm, Hole Space D=1.102-1.181)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 10-12in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.827, Screw=1/2, Hole Space D=1.181-2.170)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 11-12in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.827, Screw=5/8, Hole Space D=1.125)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Tee Nuts
  > 10-13in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.827, Screw=5/8, Hole Space D=1.250)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 14-18in. Chucks with 1/16" x 90deg Serrations (Groove width G=0.827, Screw=5/8, Hole Space D=1.562)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Tee Nuts
  > 14-15in. Chucks with 1/16" x 90deg Serrations (Groove width G=1.003, Screw=3/4-20mm, Hole Space D=1.375)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 16in. Chucks with 1/16" x 90deg Serrations (Groove width G=1.000, Screw=3/4, Hole Space D=1.562-1.750)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 18in. Chucks with 1/16" x 90deg Serrations (Groove width G=1.181, Screw=3/4-20mm, Hole Space D=1.970)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
SQUARE KEY SERRATED
  > 6in. Square Serrated Key type Groove Width G=0.738, Key Width=0.377, Screw=5/16, Hole Space D=1.688
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
  > 10-12in. Square Serrated Key type Groove Width G=0.751, Key Width=0.994, Screw=1/2, Hole Space D=1.750
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Steel Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 8in. Square Serrated Key type Groove Width G=0.501, Key Width=0.745, Screw=3/8, Hole Space D=1.438
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
    • Master Keys
  > 10-12in. Square Serrated Key type Groove Width G=0.751, Key Width=0.994, Screw=5/8, Hole Space D=1.750
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 8in. Square Serrated Key type Groove Width G=0.670, Key Width=0.601, Screw=1/2, Hole Space D=1.250
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
    • Master Keys
  > 15-18in. Square Serrated Key type Groove Width G=1.001, Key Width=1.488, Screw=3/4, Hole Space D=2.500
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 8in. Square Serrated Key type Groove Width G=0.751, Key Width=0.745, Screw=1/2, Hole Space D=1.438
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Jaw Nuts
    • Master Keys
  > 20-24in. Square Serrated Key type Groove Width G=1.001, Key Width=1.488, Screw=3/4, Hole Space D=3.000
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
3/32 X 90 DEG INCH COARSE SERRATED - LARGER EUROPEAN CHUCKS
  > 16-20in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.004, Screw=20mm, Hole Space D=1.380)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 16-25in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.004, Screw=20mm, Hole Space D=1.562)
    • Aluminum Round Jaws
    • Tee Nuts
  > 16-20in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.000, Screw=3/4, Hole Space D=1.562)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
    • Tee Nuts
  > 24in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.181, Screw=1.00, Hole Space D=2.500)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 25in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.000, Screw=3/4, Hole Space D=1.750)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
  > 40in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.181, Screw=1.00, Hole Space D=2.750)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Tee Nuts
  > 20in. Chucks with 3/32" x 90deg Serrations (Groove width G=1.102, Screw=3/4, Hole Space D=1.625)
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Tee Nuts
ACME KEY SERRATED
  > 8-9in. Acme Serrated Key type Groove Width G=0.670, Key Width=0.601, Screw=1/2, Hole Space D=1.250
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 15-18in. Acme Serrated Key type Groove Width G=1.000, Key Width=1.531, Screw=3/4, Hole Space D=2.500
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 10in. Acme Serrated Key type Groove Width G=0.750, Key Width=1.031, Screw=1/2, Hole Space D=1.750
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 21-24in. Acme Serrated Key type Groove Width G=1.250, Key Width=1.531, Screw=7/8, Hole Space D=3.000
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
  > 12in. Acme Serrated Key type Groove Width G=0.875, Key Width=1.031, Screw=5/8, Hole Space D=2.000
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Cast Iron Round Jaws
    • Hard Jaws
    • Jaw Nuts
    • Master Keys
NORTHFIELD CHUCKS
  > 3in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 4in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 6in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 7in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 8in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
  > 10in. NORTHFIELD
    • Aluminum Soft Jaws - Flat and Pointed
    • Steel Soft Jaws - Flat and Pointed
    • Aluminum Round Jaws
    • Steel Round Jaws
GBK BASE JAWS - SMW, SCHUNK QUICK CHANGE CHUCK BASE JAWS
  > KNCS-N 140 Base Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
  > KNCS-N 315 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 170 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 400 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 210 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 500 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 225 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 630 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
  > KNCS-N 260 Base Jaws & Soft Monoblock Jaws For SMW Autoblok, Schunk Quick Change Style
    • GBK Base Jaws
    • UVB Soft Monoblock Jaws
RETURNS
SHIPPING
POWER CHUCKS - FREE SHIPPING
10" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
12" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
15" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
18" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
5" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
6" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
8" CHUCKS
  > CHIP COVER
  > DRAWNUT
  > MASTER JAWS
  > MOUNTS
  > PLUNGER NUT
  > WEDGE PLUNGER
  > WRENCH
JAW BORING TOOLS
ANTI-BACKLASH RINGS


JAW BORING RINGS


LATHE BUSHINGS
BUSHING OD - 1/2"
  > TYPE H


BUSHING OD - 1 3/4"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > TYPE B


  > BORING BAR SLEEVES


BUSHING OD - 5/8"
  > TYPE H


BUSHING OD - 2"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > BORING BAR SLEEVES


BUSHING OD - 3/4"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > TYPE B


  > BORING BAR SLEEVES


  > TYPE H


  > TYPE G


BUSHING OD - 20MM (INCH ID)
  > TYPE C


BUSHING OD - 1"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > TYPE B


  > BORING BAR SLEEVES


BUSHING OD - 25MM (INCH ID)
  > TYPE C


BUSHING OD - 1 1/4"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > TYPE B


  > BORING BAR SLEEVES


BUSHING OD - 32MM (INCH ID)
  > TYPE C


BUSHING OD - 1 1/2"
  > TYPE C


  > TYPE CS


  > TYPE Z


  > TYPE J


  > TYPE B


  > TYPE LB


  > TYPE LBF


  > BORING BAR SLEEVES


BUSHING OD - 40MM (INCH ID)
  > TYPE C


COLLETS, TOOLHOLDING (ER, DA, TG)
ER8
DA100
ER11
DA180
ER16
DA200
ER20
DA300
ER25
TG75
ER32
TG100
ER40
TG150
COLLET SETS (ER, DA, TG)
ER SETS
  > ER8 COLLET SETS


  > ER11 COLLET SETS


  > ER16 COLLET SETS


  > ER20 COLLET SETS


  > ER25 COLLET SETS


  > ER32 COLLET SETS


  > ER40 COLLET SETS


TG SETS
  > TG75 COLLET SETS


  > TG100 COLLET SETS


  > TG150 COLLET SETS


DA SETS
  > DA100 COLLET SETS


  > DA180 COLLET SETS


  > DA200 COLLET SETS


  > DA300 COLLET SETS


STRAIGHT SHANK COLLET CHUCKS
ER8 STRAIGHT SHANK HOLDERS
  > 1/2" SHANK DIA. FOR ER8


  > 3/8" SHANK DIA. FOR ER8


ER25 STRAIGHT SHANK HOLDERS
  > 1/2" SHANK DIA. FOR ER25


  > 3/4" SHANK DIA. FOR ER25


  > 1" SHANK DIA. FOR ER25


ER11 STRAIGHT SHANK HOLDERS
  > 1/2" SHANK DIA. FOR ER11


  > 5/8" SHANK DIA. FOR ER11


ER32 STRAIGHT SHANK HOLDERS
  > 1" SHANK DIA. FOR ER32


  > 1-1/4" SHANK DIA. FOR ER32


  > 1-1/2" SHANK DIA. FOR ER32


ER16 STRAIGHT SHANK HOLDERS
  > 1" SHANK DIA. FOR ER16


  > 5/8" SHANK DIA. FOR ER16


  > 1/2" SHANK DIA. FOR ER16


  > 3/4" SHANK DIA. FOR ER16


ER40 STRAIGHT SHANK HOLDERS
  > 1" SHANK DIA. FOR ER40


  > 1-1/4" SHANK DIA. FOR ER40


ER20 STRAIGHT SHANK HOLDERS
  > 3/4" SHANK DIA. FOR ER20


  > 1" SHANK DIA. FOR ER20


COLLET NUTS & WRENCHES
ER08 - COLLET NUTS & WRENCHES


ER25 - COLLET NUTS & WRENCHES


ER11 - COLLET NUTS & WRENCHES


ER32 - COLLET NUTS & WRENCHES


ER16 - COLLET NUTS & WRENCHES


ER40 - COLLET NUTS & WRENCHES


ER20 - COLLET NUTS & WRENCHES


TG COLLET NUTS & WRENCHES


INDEXABLE DRILLS
Indexable Drills - QUADEX
  > Drill Dia. 0.5in.
  > Drill Dia. 1.25in.
  > Drill Dia. 0.531in.
  > Drill Dia. 1.312in.
  > Drill Dia. 0.562in.
  > Drill Dia. 1.375in.
  > Drill Dia. 0.625in.
  > Drill Dia. 1.437in.
  > Drill Dia. 0.687in.
  > Drill Dia. 1.5in.
  > Drill Dia. 0.75in.
  > Drill Dia. 1.562in.
  > Drill Dia. 0.812in.
  > Drill Dia. 1.625in.
  > Drill Dia. 0.875in.
  > Drill Dia. 1.687in.
  > Drill Dia. 0.937in.
  > Drill Dia. 1.75in.
  > Drill Dia. 1in.
  > Drill Dia. 1.812in.
  > Drill Dia. 1.031in.
  > Drill Dia. 1.875in.
  > Drill Dia. 1.062in.
  > Drill Dia. 1.937in.
  > Drill Dia. 1.125in.
  > Drill Dia. 2in.
  > Drill Dia. 1.187in.
  > QUADEX Drill Inserts and Accessories
Indexable Drills - TRIDEX
  > Drill Dia 0.75in.
  > Drill Dia 1.625in.
  > Drill Dia 0.812in.
  > Drill Dia 1.687in.
  > Drill Dia 0.875in.
  > Drill Dia 1.75in.
  > Drill Dia 0.937in.
  > Drill Dia 1.812in.
  > Drill Dia 1in.
  > Drill Dia 1.875in.
  > Drill Dia 1.031in.
  > Drill Dia 1.937in.
  > Drill Dia 1.062in.
  > Drill Dia 2in.
  > Drill Dia 1.125in.
  > Drill Dia 2.125in.
  > Drill Dia 1.187in.
  > Drill Dia 2.25in.
  > Drill Dia 1.25in.
  > Drill Dia 2.375in.
  > Drill Dia 1.312in.
  > Drill Dia 2.5in.
  > Drill Dia 1.375in.
  > Drill Dia 2.75in.
  > Drill Dia 1.437in.
  > Drill Dia 3in.
  > Drill Dia 1.5in.
  > Drill Dia 3.25in.
  > Drill Dia 1.562in.
  > TRIDEX Drill Inserts & Accessories
VISE JAWS
"Fully Machined and Chamfered" Vise Jaws
Quik Change Machinable Vise Jaws
Standard Machinable Vise Jaws


RETENTION KNOBS
HAAS RETENTION KNOBS
CAT 50(1"-8 THD.) KNOBS WITH 75DEG. ANGLE
FADAL RETENTION KNOBS
BT 40(M16-2.00) KNOBS WITH 45DEG. ANGLE
MORI SEIKI RETENTION KNOBS
BT 40(M16-2.00) KNOBS WITH 60DEG. ANGLE
CAT 40(5/8-11THD.) KNOBS WITH 45DEG. ANGLE
BT 40(M16-2.00) KNOBS WITH 90DEG. ANGLE
CAT 40(5/8-11THD.) KNOBS WITH 60DEG. ANGLE
BT 40(M16-2.00) KNOBS WITH 75DEG. ANGLE
CAT 40(5/8-11THD.) KNOBS WITH 90DEG. ANGLE
BT 50 KNOBS WITH 45DEG. ANGLE
CAT 40(5/8-11THD.) KNOBS WITH 75DEG. ANGLE
BT 50 KNOBS WITH 60DEG. ANGLE
CAT 50(1"-8 THD.) KNOBS WITH 45DEG. ANGLE
BT 50 KNOBS WITH 90DEG. ANGLE
CAT 50(1"-8 THD.) KNOBS WITH 60DEG. ANGLE
RETENTION KNOB SOCKETS
CAT 50(1"-8 THD.) KNOBS WITH 90DEG. ANGLE
16C AND 3J COLLETS
16C ROUND


3J ROUND


16C EMERGENCY


3J EMERGENCY


MILL TOOLHOLDERS
BT-30 TAPER TOOLHOLDERS
  > BT-30 DA COLLET CHUCKS


  > BT-30 ER COLLET CHUCKS


    • BT-30 TAPER ER16 COLLET CHUCKS
    • BT-30 TAPER ER20 COLLET CHUCKS
    • BT-30 TAPER ER25 COLLET CHUCKS
    • BT-30 TAPER ER32 COLLET CHUCKS
  > BT-30 ENDMILL HOLDERS


    • BT-30 TAPER 0.125 (1/8) ENDMILL HOLDERS
    • BT-30 TAPER 0.1875 (3/16) ENDMILL HOLDERS
    • BT-30 TAPER 0.250 (1/4) ENDMILL HOLDERS
    • BT-30 TAPER 0.375 (3/8) ENDMILL HOLDERS
    • BT-30 TAPER 0.4375 (7/16) ENDMILL HOLDERS
    • BT-30 TAPER 0.500 (1/2) ENDMILL HOLDERS
    • BT-30 TAPER 0.625 (5/8) ENDMILL HOLDERS
    • BT-30 TAPER 0.750 (3/4) ENDMILL HOLDERS
    • BT-30 TAPER 0.875 (7/8) ENDMILL HOLDERS
    • BT-30 TAPER 1.000 (1 INCH) ENDMILL HOLDERS
CAT-40 TAPER TOOLHOLDERS
  > CAT-40 DA COLLET CHUCKS


    • CAT-40 TAPER DA 100 COLLET CHUCKS
    • CAT-40 TAPER DA 180 COLLET CHUCKS
    • CAT-40 TAPER DA 200 COLLET CHUCKS
    • CAT-40 TAPER DA 300 COLLET CHUCKS
  > CAT-40 MORSE TAPER HOLDERS


    • CAT-40 TAPER MORSE TAPER #2 HOLDERS
    • CAT-40 TAPER MORSE TAPER #3 HOLDERS
    • CAT-40 TAPER MORSE TAPER #4 HOLDERS
  > CAT-40 ENDMILL HOLDERS


    • CAT-40 TAPER 0.125 (1/8) ENDMILL HOLDERS
    • CAT-40 TAPER 0.1875 (3/16) ENDMILL HOLDERS
    • CAT-40 TAPER 0.250 (1/4) ENDMILL HOLDERS
    • CAT-40 TAPER 0.312 (5/16) ENDMILL HOLDERS
    • CAT-40 TAPER 0.375 (3/8) ENDMILL HOLDERS
    • CAT-40 TAPER 0.4375 (7/16) ENDMILL HOLDERS
    • CAT-40 TAPER 0.500 (1/2) ENDMILL HOLDERS
    • CAT-40 TAPER 0.562 (9/16) ENDMILL HOLDERS
    • CAT-40 TAPER 0.625 (5/8) ENDMILL HOLDERS
    • CAT-40 TAPER 0.750 (3/4) ENDMILL HOLDERS
    • CAT-40 TAPER 0.875 (7/8) ENDMILL HOLDERS
    • CAT-40 TAPER 1.000 (1 INCH) ENDMILL HOLDERS
    • CAT-40 TAPER 1.250 (1-1/4) ENDMILL HOLDERS
    • CAT-40 TAPER 1.500 (1-1/2) ENDMILL HOLDERS
  > CAT-40 SHELL MILL HOLDERS


    • CAT-40 TAPER SHELL MILL - 0.50" ARBOR PILOT HOLDERS
    • CAT-40 TAPER SHELL MILL - 0.750" ARBOR PILOT HOLDERS
    • CAT-40 TAPER SHELL MILL - 1" ARBOR PILOT HOLDERS
    • CAT-40 TAPER SHELL MILL - 1.250" ARBOR PILOT HOLDERS
    • CAT-40 TAPER SHELL MILL - 1.50" ARBOR PILOT HOLDERS
  > CAT-40 ER COLLET CHUCKS


    • CAT-40 TAPER ER11 COLLET CHUCKS
    • CAT-40 TAPER ER16 COLLET CHUCKS
    • CAT-40 TAPER ER20 COLLET CHUCKS
    • CAT-40 TAPER ER25 COLLET CHUCKS
    • CAT-40 TAPER ER32 COLLET CHUCKS
    • CAT-40 TAPER ER40 COLLET CHUCKS
  > CAT-40 TG COLLET CHUCKS


    • CAT-40 TAPER TG 100 COLLET CHUCKS
    • CAT-40 TAPER TG 150 COLLET CHUCKS
    • CAT-40 TAPER TG 75 COLLET CHUCKS
  > CAT-40 JACOBS TAPER HOLDERS


    • CAT-40 TAPER JACOBS TAPER #1 HOLDERS
    • CAT-40 TAPER JACOBS TAPER #2 HOLDERS
    • CAT-40 TAPER JACOBS TAPER #3 HOLDERS
    • CAT-40 TAPER JACOBS TAPER #33 HOLDERS
    • CAT-40 TAPER JACOBS TAPER #6 HOLDERS
BT-40 TAPER TOOLHOLDERS
  > BT-40 DA COLLET CHUCKS


    • BT-40 TAPER DA 100 COLLET CHUCKS
    • BT-40 TAPER DA 180 COLLET CHUCKS
    • BT-40 TAPER DA 200 COLLET CHUCKS
    • BT-40 TAPER DA 300 COLLET CHUCKS
  > BT-40 JACOBS TAPER HOLDERS


    • BT-40 TAPER JACOBS TAPER #3 HOLDERS
  > BT-40 ENDMILL HOLDERS


    • BT-40 TAPER 0.125 (1/8) ENDMILL HOLDERS
    • BT-40 TAPER 0.1875 (3/16) ENDMILL HOLDERS
    • BT-40 TAPER 0.250 (1/4) ENDMILL HOLDERS
    • BT-40 TAPER 0.312 (5/16) ENDMILL HOLDERS
    • BT-40 TAPER 0.375 (3/8) ENDMILL HOLDERS
    • BT-40 TAPER 0.4375 (7/16) ENDMILL HOLDERS
    • BT-40 TAPER 0.500 (1/2) ENDMILL HOLDERS
    • BT-40 TAPER 0.562 (9/16) ENDMILL HOLDERS
    • BT-40 TAPER 0.625 (5/8) ENDMILL HOLDERS
    • BT-40 TAPER 0.750 (3/4) ENDMILL HOLDERS
    • BT-40 TAPER 0.875 (7/8) ENDMILL HOLDERS
    • BT-40 TAPER 1.000 (1 INCH) ENDMILL HOLDERS
    • BT-40 TAPER 1.250 (1-1/4) ENDMILL HOLDERS
    • BT-40 TAPER 1.500 (1-1/2) ENDMILL HOLDERS
  > BT-40 SHELL MILL HOLDERS


    • BT-40 TAPER SHELL MILL - 0.750" ARBOR PILOT HOLDERS
    • BT-40 TAPER SHELL MILL - 1" ARBOR PILOT HOLDERS
    • BT-40 TAPER SHELL MILL - 1.250" ARBOR PILOT HOLDERS
    • BT-40 TAPER SHELL MILL - 1.50" ARBOR PILOT HOLDERS
  > BT-40 ER COLLET CHUCKS


    • BT-40 TAPER ER11 COLLET CHUCKS
    • BT-40 TAPER ER16 COLLET CHUCKS
    • BT-40 TAPER ER20 COLLET CHUCKS
    • BT-40 TAPER ER25 COLLET CHUCKS
    • BT-40 TAPER ER32 COLLET CHUCKS
    • BT-40 TAPER ER40 COLLET CHUCKS
  > BT-40 TG COLLET CHUCKS


    • BT-40 TAPER TG 100 COLLET CHUCKS
CAT-50 TAPER TOOLHOLDERS
  > CAT-50 DA COLLET CHUCKS


    • CAT-50 TAPER DA 180 COLLET CHUCKS
  > CAT-50 MORSE TAPER HOLDERS


    • CAT-50 TAPER MORSE TAPER #5 HOLDERS
  > CAT-50 ENDMILL HOLDERS


    • CAT-50 TAPER 0.1875 (3/16) ENDMILL HOLDERS
    • CAT-50 TAPER 0.250 (1/4) ENDMILL HOLDERS
    • CAT-50 TAPER 0.312 (5/16) ENDMILL HOLDERS
    • CAT-50 TAPER 0.375 (3/8) ENDMILL HOLDERS
    • CAT-50 TAPER 0.4375 (7/16) ENDMILL HOLDERS
    • CAT-50 TAPER 0.500 (1/2) ENDMILL HOLDERS
    • CAT-50 TAPER 0.562 (9/16) ENDMILL HOLDERS
    • CAT-50 TAPER 0.625 (5/8) ENDMILL HOLDERS
    • CAT-50 TAPER 0.750 (3/4) ENDMILL HOLDERS
    • CAT-50 TAPER 0.875 (7/8) ENDMILL HOLDERS
    • CAT-50 TAPER 1.000 (1 INCH) ENDMILL HOLDERS
    • CAT-50 TAPER 1.250 (1-1/4) ENDMILL HOLDERS
    • CAT-50 TAPER 1.500 (1-1/2) ENDMILL HOLDERS
  > CAT-50 SHELL MILL HOLDERS


    • CAT-50 TAPER SHELL MILL - 0.750" ARBOR PILOT HOLDERS
    • CAT-50 TAPER SHELL MILL - 1" ARBOR PILOT HOLDERS
    • CAT-50 TAPER SHELL MILL - 1.250" ARBOR PILOT HOLDERS
    • CAT-50 TAPER SHELL MILL - 1.50" ARBOR PILOT HOLDERS
  > CAT-50 ER COLLET CHUCKS


    • CAT-50 TAPER ER16 COLLET CHUCKS
    • CAT-50 TAPER ER20 COLLET CHUCKS
    • CAT-50 TAPER ER25 COLLET CHUCKS
    • CAT-50 TAPER ER32 COLLET CHUCKS
    • CAT-50 TAPER ER40 COLLET CHUCKS
  > CAT-50 TG COLLET CHUCKS


    • CAT-50 TAPER TG 100 COLLET CHUCKS
SLOKY - PRESET TORQUE SCREWDRIVERS
HD SINGLE SETS


LT SINGLE SETS


ST SINGLE SETS


VDI STATIC TOOL HOLDERS
AXIAL FORM TURNING TOOL HOLDERS
  > Form C1


  > Form C2


  > Form C3


  > Form C4


BLANK MACHINABLE PLUGS
COMBINATION RADIAL/AXIAL TURNING TOOL HOLDERS
  > Form CB1


  > Form CB2


  > Form CB3


  > Form CB4


  > Form D1


  > Form D2


Determine Holder Required by Inspection of Old holder
INDEXABLE DRILL & BORING BAR HOLDERS
  > Form E1 Indexable Drill Holders


  > Form E2 Boring Bar Holders


RADIAL FORM TURNING TOOL HOLDERS
  > Form B1


  > Form B2


  > Form B3


  > Form B4


  > Form B5


  > Form B7


CUTTING TOOLS - FREE SHIPPING
DRILLS
ENDMILLS - SOLID CARBIDE - MADE IN USA
  > BALL NOSE
    • 2 FLUTE - FOR ALUMINUM AND NON FERROUS
    • 4 FLUTE - FOR STEELS, STAINLESS
  > SQUARE END
    • 3 FLUTE - CHATTER FREE FOR ALUMINUM
    • 4 FLUTE - FOR HARD STEELS AND STAINLESS
    • 5 FLUTE - FOR STAINLESS, TITANIUM, INCONEL
  > SQUARE END - WITH RADIUS
    • 3 FLUTE - CHATTER FREE FOR ALUMINUM
    • 4 FLUTE - FOR HARD STEELS AND STAINLESS
    • 5 FLUTE - FOR STAINLESS, TITANIUM, INCONEL
TAPS
MILLING PRODUCTIVITY AIDS